All Products

Carburetor upper part HK350/HK500

The upper part of the carburetor is part of the carburetor. There is a thread for the carburetor nozzle above the carburetor helix, and the lower part of the carburetor is fastened at the lower end by means of a union nut.

Pump knob HK150/HK250/HK350/HK500 blue

This classic pump knob in blue is adorned with a gold-colored Petromax lettering. It is suitable for all Petromax models HK150/250/350/500.

Rocker arm & parts HK150/HK250/HK350/HK500 chrome

The toggle lever is used to manually open and close the rapid. When closing, it presses on the nozzle and ensures that no fuel escapes. The rocker arm here is already equipped with the socket with seal and screw, which is also available separately.

Rapid preheater sieve HK150/HK250/HK350/HK500

The screen is a component of the rapid preheater. Its filter function prevents unwanted particles from entering the nozzle. It can be installed in all Petromax models.

Parabolic side reflector HK250/HK350/HK500 brass

The parabolic side reflector focuses the light of the Petromax lamp in one direction. The curved shape of the reflector thereby creates a spotlight-like beam. At the same time, the parabolic side reflector also acts as a glare shield in the other direction. The reflector is attached to the lamp via two bracket arms next to the knurled nuts. The parabolic side reflector cannot be attached to the lamp together with the Petromax Top reflector.

Pent roof grommet Loki + Loki2

With this diffuser, the stovepipes of the Petromax Loki2 are safely guided through various front or shed roofs and can be permanently attached.

Baffle plate HK350/HK500 brass

The baffle plate is a useful and recommended accessory for any Petromax strong light lamp. In the event of a defective glow plug, small but very hot flames can spread in the lamp and loosen solder joints on the tank. The baffle plate, which is inserted into the carrying frame above the centering base, shields the tank. The protective baffle plate ensures that the tank remains intact even if the filaments are damaged. The baffle plate is also required for mounting the Petromax radiator. This baffle plate is manufactured for lamps from year of manufacture 2000. These can be recognized by the screwed support rods of the support frame. For lamps before year of manufacture 2000, the support rods are riveted to the frame.

Preheating tray HK250/HK350/HK500 brass

This brass colored preheating bowl is filled with spirit to preheat the lamp. It is suitable for Petromax models HK250/350/500.

Vesta shade diameter 235 mm in opal white

Vesta shade is suitable as a replacement part for classic kerosene lamps and electric table lamps. Even lightThe curved shade distributes the light evenly and prevents being dazzled by the lamp. The glass gently colors the lamp light, creating a moody atmosphere.Tolerance dimensionsPlease note that the specified dimensions may differ by 2-3 mm due to manufacturing tolerances.

Two-hole glow plug HK250

The high-quality two-hole glow mantle from Petromax is particularly durable due to the attachment to the burner and the bracket. The fixation at two points ensures that no damage occurs due to vibration during transport. It is important to attach it correctly, that is, do not stretch the mantle too much, otherwise it may tear. The glow plug is free of asbestos and is not radioactive.

Thrust piece, screw & yoke HK250/HK350/HK500

This set of thrust piece, screw and yoke is used to fix the mixing tube of the Petromax lamp.

Glass HK150 clear

This glass cylinder for the Petromax HK150 is made of highly heat-resistant borosilicate glass. The resistant borosilicate glass from the Schott company is characterized by its excellent quality. It has always been a component of all Petromax high-intensity lamps in the form of the glass cylinder.

Screw thrust piece HK250/HK350/HK500

This screw for the pressure piece (#20) is suitable for Petromax models HK250/350/500.

Washer Handwheel HK150/HK250/HK350/HK500

The washer without embossing for all Petromax strong light lamp models HK150/HK250/HK350/HK500.

Handwheel blue HK150/HK250/HK350/HK500

This blue handwheel with Petromax lettering is suitable for the Petromax models HK150/250/350/500.

Nozzle nut Rapid preheater HK150/HK250/HK350/HK500

This nozzle nut is part of the raid and is responsible for fixing the rocker arm. It can be installed in all Petromax models.

Centering base HK350/HK500 chrome

The centering base serves as a connecting piece between the tank and the carrying frame and is fixed with the centering base screw. It has recesses for the carburetor and the rapid starter as well as a row of holes to ensure cooling of the tank by the resulting air draft when the lamp is in operation.

Eccentric (complete) HK150/HK250/HK350/HK500

This complete eccentric with blue handwheel is suitable for Petromax models HK150/250/350/500.

Radiator HK350/HK500

With the Petromax Radiator, the Petromax HK350/500 can be converted into a heater. For this purpose, the radiator made of stainless steel is mounted on a suitable baffle plate. The radiator can be used with or without a mantle. The optimum heating power is achieved when the lamp glass and the mantle are removed for operation with the radiator.

Glass HK150 horizontal matt

This partially frosted glass cylinder for the Petromax HK150 is made of highly heat-resistant borosilicate glass. Due to the frosting in the upper area, the lamp light is effectively dimmed. At the same time, the incandescent mantle and the spirit bowl can be seen through the clear part of the glass.

Hood HK350/HK500 Chrome

The hood serves to protect the inside of the lamp and covers the inner jacket. It is attached to the support frame by means of two screws. The perforated edge ensures the supply of fresh air and allows the resulting heat and exhaust gases to escape.

Pump piston nut HK150/HK250/HK350/HK500

This pump piston nut is suitable for all Petromax models HK150/250/350/500.

Groove handwheel HK150/HK250/HK350/HK500

This nut is suitable for the handwheels of all Petromax models HK150/250/350/500.

Viewing Window Oven Door Loki2 (spare part)

For a clear view and full fire control: With this viewing window you can replace a defective pane on the stove door of your Petromax Loki2 tent stove. It is made of high-strength borosilicate glass and is extremely heat-resistant. Safety note: To change the pane, please unscrew the screw and nut of the lower retaining plate on the stove door beforehand. Be careful when removing the retaining plate on the inside, as the old, defective glass pane or glass fragments may fall down. Then install the new viewing window in reverse order.

Rapid preheater HK350/HK500 brass

The Rapid Preheater consists of a total of eight individual parts. Here it is already completely assembled and can be installed directly in the Petromax lamp.All parts are also individually replaceable and available.

Sleeve carburetor valve HK150/HK250/HK350/HK500

The sleeve is a component of the carburetor valve. It has the function of holding the valve and also has a sieve that filters particles. The sleeve can be installed in all Petromax models. The carburetor valve consisting of gasket, spring and sleeve is also available already assembled.

Flame protection tube HK150/HK250/HK350/HK500

The flame tube is part of the rapid igniter, which is installed in the Petromax models. It is responsible for bringing the flame into shape, so that it does not strike out uncontrollably. Furthermore, the petroleum coming out of the nozzle mixes with air in the flame tube, which can flow in through the holes in the tube. It can be installed in all Petromax models.

Spring carburetor valve HK150/HK250/HK350/HK500

The spring is a component of the carburetor valve. Turning the handwheel opens or closes the carburetor valve, while the spring keeps the pressure on the seal. It can be installed in all Petromax models. The carburetor valve consisting of seal, spring and sleeve is also available already assembled.

Exzenternippel HK150/HK250/HK350/HK500

This eccentric nipple is suitable for the Petromax models HK150/250/350/500.

Union nut eccentric HK150/HK250/HK350/HK500

This union nut is the central component of the eccentric. It is suitable for Petromax models HK150/250/350/500.

Vesta shade diameter 180 mm in opal white

Vesta shade is suitable as a replacement part for classic kerosene lamps and electric table lamps. Even lightThe curved shade distributes the light evenly and prevents being dazzled by the lamp. The glass gently colors the lamp light, creating a moody atmosphere.Tolerance dimensionsPlease note that the specified dimensions may differ by 2-3 mm due to manufacturing tolerances.

Carrying frame HK350/HK500 chrome

The carrying frame serves as a holder for the glass cylinder as well as for the entire upper part of the lamp with the loose-fitting inner jacket. The rack is mounted on the tank with centering base and centering base screw.The carrying rack allows the Petromax lamp to be easily and safely carried, placed or hung.

Glass Meva 865

The clear glass for Meva 865 in the classic version.

Pump cover HK150/HK250/HK350/HK500 chrome

This chrome colored pump cover is suitable for all Petromax models HK150/250/350/500.

Yoke mixing tube HK250/HK350/HK500

This yoke is suitable for the mixing tube of Petromax models HK250/350/500.

Centering base screw HK150/HK350/HK500 Chrome

This screw for the centering base in the color chrome is suitable for the Petromax models HK150/350/500.

Glass fiber round wick diameter 8 mm x 100 cm

The glass fiber round wick is ideal for oil lamps, garden torches and spirit lamps. Since the glass fiber wick hardly wears out through combustion, it is ideal as a permanent wick. Therefore, frequently used wick lamps in particular benefit from this wick. If glass fiber wicks are operated with high-quality fuels such as Petromax alkane, the service life is additionally extended.

Glass hl1 matt

The matte glass diffuses the light of the Petromax hl1 storm lantern in a pleasant way, creating a moody atmosphere.

Glass HK150 matt

This frosted glass cylinder for the Petromax HK150 is made of high heat resistant borosilicate glass. The frosted glass gently dims the bright light of the Petromax strong light lamp and distributes it evenly.

Glass diameter 120 mm x 120 mm clear

The clear glass for Radius, Hasag, Mewa and many others.

Glass fiber round wick diameter 6 mm x 100 cm

The glass fiber round wick is ideal for oil lamps, garden torches and spirit lamps. Since the glass fiber wick hardly wears out through combustion, it is ideal as a permanent wick. Therefore, frequently used wick lamps in particular benefit from this wick. If glass fiber wicks are operated with high-quality fuels such as Petromax alkane, the service life is additionally extended.

Vesta shade diameter 155 mm in opal white

Vesta shade is suitable as a replacement part for classic kerosene lamps and electric table lamps. Even lightThe curved shade distributes the light evenly and prevents being dazzled by the lamp. The glass gently colors the lamp light, creating a moody atmosphere.Tolerance dimensionsPlease note that the specified dimensions may differ by 2-3 mm due to manufacturing tolerances.

Carrying frame HK350/HK500 brass

The carrying frame serves as a holder for the glass cylinder as well as for the entire upper part of the lamp with the loose-fitting inner jacket. The rack is mounted on the tank with centering base and centering base screw.The carrying rack allows the Petromax lamp to be easily and safely carried, placed or hung.

Hood HK350/HK500 Brass

The hood serves to protect the inside of the lamp and covers the inner jacket. It is attached to the support frame by means of two screws. The perforated edge ensures the supply of fresh air and allows the resulting heat and exhaust gases to escape.

Vesta shade diameter 125 mm in opal white

Vesta shade is suitable as a replacement part for classic kerosene lamps and electric table lamps. Even lightThe curved shade distributes the light evenly and prevents being dazzled by the lamp. The glass gently colors the lamp light, creating a moody atmosphere.Tolerance dimensionsPlease note that the specified dimensions may differ by 2-3 mm due to manufacturing tolerances.

Glass fiber round wick diameter 4 mm x 100 cm

The glass fiber round wick is ideal for oil lamps, garden torches and spirit lamps. Since the glass fiber wick hardly wears out through combustion, it is ideal as a permanent wick. Therefore, frequently used wick lamps in particular benefit from this wick. If glass fiber wicks are operated with high-quality fuels such as Petromax alkane, the service life is additionally extended.

Glass bell 835

Technical dataMaterial: glassCollar diameter: 16 cmInner diameter (without collar): 14.5 cmW x H x D (in cm): 16 x 17 x 16W x H x D with packaging (in cm): 16 x 17 x 16Weight (in g): 250Weight with packaging (in g): Scope of delivery1 x glass bell Petromax 835

Vesta shade diameter 190 mm in champagne

Vesta shade is suitable as a replacement part for classic kerosene lamps and electric table lamps. Even lightThe curved shade distributes the light evenly and prevents being dazzled by the lamp. The glass gently colors the lamp light, creating a moody atmosphere.Tolerance dimensionsPlease note that the specified dimensions may differ by 2-3 mm due to manufacturing tolerances.

Pressure gauge screw HK150/HK250/HK350/HK500 brass

The bleed screw is located on the pressure gauge. It is responsible for maintaining the operating pressure or reducing it if necessary.

Two-hole glow plug HK150

The high-quality two-hole glow mantle from Petromax is particularly durable due to the attachment to the burner and the bracket. The fixation at two points ensures that no damage occurs due to vibration during transport. It is important to attach it correctly, that is, do not stretch the mantle too much, otherwise it may tear. The glow plug is free of asbestos and is not radioactive.